Electrical Services, Data Cabling & Installation Perth & WA (old)

Fibre cabling, also known as optical fibre cabling, is a type of cabling that uses thin strands of glass or plastic to transmit data signals using light. This type of cabling is capable of transmitting data over much longer distances than traditional copper cabling and is also more resistant to electromagnetic interference. Fibre cabling is commonly used in high-speed internet connections, as well as in telecommunications networks, data centres, and other applications that require high-speed and reliable data transmission. Additionally, fibre cabling is considered more secure than copper cabling, as it is difficult to tap into the signal without disrupting it.

Category 6 cabling, on the other hand, is a type of twisted pair cabling that is used primarily in Ethernet networks. It is designed to support data transmission speeds of up to 10 Gigabits per second and is commonly used in commercial and industrial applications. It is known as gigabit ethernet cabling. Category 6 gigabyte ethernet cabling is also known for its superior noise reduction capabilities, making it an ideal choice for environments where interference from other electronic devices is a concern.

Data Cabling Perth

As a leading data cabling company in Perth, we understand the importance of providing our clients with the best possible cabling solutions. We specialize in the installation of figure and category 6 cabling, two of the most popular types of cabling used in data transmission today.

At our data cabling company in Perth, we pride ourselves on our ability to provide high-quality and reliable cabling solutions for businesses of all sizes by our experienced technicians. Whether you’re in need of figure or category 6 cabling, we have the expertise and experience to provide you with the best possible solution for your needs.

Our team of highly trained professionals will work with you every step of the way to ensure that your cabling installation is completed on time and within budget. We use only the best materials and equipment to ensure that your cabling is of the highest quality and will provide you with years of reliable service.

Data Centre Fitouts

When it comes to setting up a data center or telecommunications room, the installation and fitouts are crucial. These rooms require careful planning and attention to detail to ensure that the equipment and wiring is installed properly and operates at maximum efficiency. From equipment racks and cable management systems to cooling and power distribution, electrical work and wiring, every aspect of the installation must be considered to create a reliable and secure infrastructure. In addition to the initial installation, ongoing maintenance and updates are necessary to keep the system running smoothly.

This includes tasks such as installing patch cables, which connect devices to the network and allow for data transfer. With our expert installation and fitouts, you can be confident that your data center or telecommunications room will operate efficiently and reliably for years to come.

Perth Data Cabling & Installation Near Me

In addition to our cabling installation services, we also offer a range of other services, including network design and implementation, data cable testing and certification, connectivity and existing cabling fault finding and ongoing maintenance and support. We understand that technology is constantly evolving, and we work hard to stay up-to-date with the latest industry trends and best practices.

If you’re in need of high-quality, reliable data cabling solutions in Perth, look no further than our electrical contractor and data cabling company. We are committed to providing our clients with expert advice and the best possible service and support, and we look forward to helping you with all of your cabling needs. Contact us today to learn more about our services and to schedule a consultation with one of our experts.

---

Previous Clients

Client: Consolidated Minerals
Project: Consolidated Minerals Woodie-Woodie Western Australia

Major relocation and build of a 480-man camp and mine communications infrastructure using the latest’s technology available. This enables workers on-site to enjoy internet and voice services in their individual rooms.
The rooms are CAT5 and fibre installation back to a main switch that is connected to a satellite, this was a major step forward in the process of mining camp communications and the external construction was designed by Fibre Solutions. 
The full integration allowed VOIP in each room with the inclusion of Foxtel and free-to-air TV stations.

Client: Panoramic Resources
Project: Panoramic Resources at the site out from Kambalda Western Australia
Major build of a 120-man camp and mine communications infrastructure using the latest’s technology available. This enables workers on-site to enjoy internet and voice services in their individual rooms.
The rooms are CAT 5/6 and fibre installation back to a main switch that is connected to a satellite, this was a major step forward in the process of mining camp communications and the external construction was designed by Fibre Solutions. 
The full integration allowed VOIP in each room with the inclusion of Foxtel and free-to-air TV stations.

Client: Fremantle Port Authority (FPA)
Installation and construction of fibre cable to all of the locations at the Fremantle port for CCTV installation. This included breakouts at strategic locations along the wharf, car parks and roof areas to monitor the activities at these locations.
This would now allow for the introduction of CCTV for monitoring. This was completed in a professional and timely manner integrating external cabinets with FOBOT to FOBOT interconnections to cover approx 8km section and going back to the head end for monitoring and storing of information. This was a major step forward in the process for the FPA to be able to capture and monitor the coverage of its car parks, wharf and surrounding areas. This was implemented and designed with the help of Fibre Solutions staff.
At each of the spur cable ends a cabinet and FOBOT were installed, data cables were spliced and then tested with OTDR for continuity.
All reports and documentation were included in the handover as a build pack on completion.

Client: Silcar Communications
Project: Wideband Contract
The contract entailed:

• Site survey
• Liaising with building managers for access to new conduits, ducting and cabling within the building.
• Access to buildings for all works to take place either in or out of hours.
• All civil construction activities for external and internal
• Hauling and installation of cables within the building to external FAP
• New data cable and or patch lead installation in exchanges
• New ducting installation in exchanges if required
• Rack and FOBOT installation and terminations in exchanges and customer premises
• Termination and testing of all fibre cable cores
• Commission testing of all fibres required
• Exchange to customer full testing as required
• Documentation and workbooks on completion of works
• As built documentation.

Client: Pipe Networks

New cable ring and building installations in Perth CBD for new customers.

The contract entailed:

• Site survey
• Liaising with building managers for access to new conduits, ducting and cabling within the building.
• Access to buildings for all works to take place either in or out of hours.
• All civil construction activities for external and internal
• Hauling and installation of cables within the building to external FAP
• Termination and testing of all fibre cable cores
• Commission testing of all fibres required
• Documentation and workbooks on completion of works

Client: Silk Telecommunications
New cable ring and building installations in Perth CBD for new customers.
The contract entailed:

• site survey
• Liaising with building managers for access to new conduits, ducting and cabling within the building.
• Access to buildings for all works to take place either in or out of hours.
• All civil construction activities for external and internal
• Hauling and installation of cables within the building to external FAP
• Termination and testing of all fibre cable cores
• Commission testing of all fibres required
• Documentation and workbooks on completion of works

Client: NRW Holdings
Installation and construction of a new micro trenching method to link the existing office to new premises 700 metres away.
The micro trenching was used to install the fibre cable as it was a busy location and using the micro trenching method eliminated the amount of time the trench was open and how many trenches needed to be open. It saved on the reinstatement time and costs.
We are now introducing this into other areas where high traffic and pedestrian management is an issues.
This was implemented and designed by Fibre Solutions.

Client: Vision Stream
Wideband Contract:
The contract entailed:

• Site survey
• Liaising with building managers for access to new conduits, ducting and cabling within the building.
• Access to buildings for all works to take place either in or out of hours.
• All civil construction activities for external and internal
• Hauling and installation of cables within the building to external FAP
• New cable and or patch lead installation in exchanges
• New ducting installation in exchanges if required
• Rack and FOBOT installation and terminations in exchanges and customer premises
• Termination and testing of all fibre cable cores
• Commission testing of all fibres required
• Exchange to customer full testing as required
• Documentation and workbooks on completion of works
• As built documentation.

---

Specialised Equipment

Fibre Solutions owns and maintains a fleet of specialized vehicles and mechanical aids. A fleet of specifically fitted-out vans is provided for all Fibre splicing and copper cable jointing and testing projects. Fibre Solutions van fleet has specialised tools for Raychem FOSC, FIST joint preparation and restoration, and fibre management during network builds and outages. This enables quicker build times for larger fibre count cable setup and splicing.

The specialised equipment for testing and recording includes:

• GNNETTEST CMA 4000 Dual Wave OTDR for testing and recording test results for fibre optic cables. (single and multimode cables)
• GNNETTEST CMA 5000 Tri Wave OTDR for testing and recording test results for fibre optic cables. (single mode cables)
• GNNETTEST Power Meter Light Source Meters for testing Fibre optic cables
• Fluke 1800 Tri wave for testing and recording results for CAT5/6 and Single & Multi-Mode fibre optic cables
• Fluke Dual wave for testing Multimode fibre optic cables
• EXFO PON test meter for testing and recording fibre optic cables
• EXFO Tri wave Power Meter & Light Source for testing Single Mode fibre optic cable

The specialised equipment for fibre splicing includes:

• Sumitomo 39 Splicing machines
• FITEL 177 Splicing machine
• Fujikura 50 & 60 Splicing machines

Hauling setup and fiber optic cabling system process for hauling of cable in length between manhole to manhole. This is a likely scenario for IEN delivery.

Fibre optic cable setup and preparation for splicing within the housing to control the stacker and reclaimer at a mine site.

Optic Fibre and Copper Cabling

HAULING (Internal & External)

• SWITCHING
• FUSION SPLICING
• BLOWN FIBRE INSTALLATION
• TERMINATIONS OPTIC FIBRE CAT5/6
• FAULT LOCATION &REPAIR
• TEST & COMMISSION
• OPGW
• DWDM
• CCTV
• DESIGN
• ITG FIBRE

Affiliations & Training

• RJC Construction
• B & H Pipeline
• OG Consultants
• Data Visual Link
• Perth Metro
• R j Electrical
• Blue Tongue Electrical
• Service Stream
• Downer EDI
• EC&M
• Austrade-Ozmine
• Integracom Training
• Mining Intelligent Institute
• Linkin Zones Solutions
• Milcom Training

General accreditations

• Fibre Solutions staff are all accredited with Certificate 3 in Telecommunications
• Telstra Accreditations
• NBN Accredited
• OPTUS Accredited
• Advanced Services Accredited Sub Contractor
• Optic Fibre Installation & Maintenance
• Exchange Site Access (induction course)
• CPAS
• Cable Re-arrangements & Cut-overs
• Jointing-Advanced and CPE Installations
• Utility Accreditations
• Next-gen preferred contractor for installation and repair
• City of Perth accredited for installation and repair
• Pipe Networks preferred contractor for installations
• Western Power Safety Level 1 & 2
• PTA Perth Track Access Contractor
• Western Power External Plant Certification (WA)
• Level 1 & 2 First aid certificate holders
• Confined Space Trained (Telstra/OPTUS accredited)
• HV Substation 1 & 2 trained (blue book and green book standards for Western Power)
• ACA licensed/ registered cablers with Aerial, underground, fibre, CAT5/6 & coaxial endorsements.
• Traffic management safety skill trained
• Fibre winching certification
• Winch host license
• Power awareness and elevated work platform certification
• National heavy articulated vehicle drivers license